RF Filters

RF Shielded Filters Raymond RF offers a complete line of RF shielded filters ranging from 0.5A to 60A for our QuietBoxes and Anechoic Chambers. Both styles of filters can be supplied with NPT pipe nipples and flange nuts for mounting directly on a QuietBox or Anechoic Chamber. Alternately, both styles of filters can be remotely mounted with shielded conduit running between the clean end of the filter and the QuietBox or Anechoic Chamber.

Signal Filter Brochure Power Filter Brochure Request a quote

Applicable Standards

MIL-STD-202F
Test Methods for Electronic and Electrical Components Parts.
MIL-STD-220
Method of Insertion Loss Measurement. 1988-09-19

Power Line Filters All standard standalone power line filters rated at 30A or lower come complete with two separate filtering circuits allowing two conducting lines to be filtered per installed filter.

Power line filters are rated to UL1283.

Typical Application Power distribution within an RF Shielded QuietBox or Anechoic Chamber

Applicable Power Line Filter Ratings

Amperage Rating: 5A to 60A
Voltage Rating: 120/208/277/480 VAC; 600 VDC 50/60Hz
Voltage Drop: 2% Maximum at full rated unity power factor load
Current Overload: 140% maximum current rating for a maximum of 15 minutes
Temperature: -10°C to +85°C
Insertion Loss: 100 dB from 10 kHz to 10 GHz
Dielectric Withstand Voltage: 2X rated Voltage
Insulation Resistance: As per MIL-STD-15733F

Signal Filters All standard standalone signal line filters come complete with two separate filtering circuits allowing two conducting lines to be filtered per installed filter. Signal Line filters can be custom ordered to have up to four filtering circuits per filter.
Signal Filter Applications RF Shielded Filter

Applicable Signal Filter Ratings

Voltage Drop: 2% Maximum at full rated unity power factor load
Current Overload: 140% maximum current rating for a maximum of 15 minutes
Temperature: -15°C to +85°C
Insertion Loss: 100 dB from 10 kHz to 10 GHz
Dielectric Withstand Voltage: 2X rated Voltage
Insulation Resistance: As per MIL-STD-15733F

Privacy